Description
SURRON ULTRA BEE SIDE STAND SWITCH SENSOR – Side stand, prop stand, sensor switch. If you cannot start your bike with the ignition ON and the Kill switch in the ON position with your side stand up, there is a good chance that your side stand sensor switch is faulty. This is a direct replacement OEM factory part which should take ten minutes to fit.
- L Footpeg Assy. | Part number: 42110-YQ5A-0000
- Top Side Stand Pin | Part number: 41555-YQ2A-0000
- L Footpeg Bracket | Part number: 42112-YQ5A-0000
- Footpeg Spring | Part number: 42115-YQ5A-0000
- Footpeg INST. Pin | Part number: 42116-YQ5A-0000
- Washer B4001 d10 | Part number: B4-001-10-F0
- E-type Circlip B4007 d8 | Part number: B4-007-08-F0
- L Footpeg | Part number: 42111-YQ5A-0000
- Screw B3001 M8*25 | Part number: B3-001-08-025-F0
- Cable Tie 36150 | Part number: 81147-YQ2A-0000
- Screw B3002 M5*10 | Part number: B3-002-05-010-F0
- Side Stand Switch Clip | Part number: 81138-YQ2A-0000
- Side Stand Spring | Part number: 41556-YQ5A-0000
- BOTTOM Side Stand Pin | Part number: 41555-YQ2A-0000
- Nut B2007 M10*1.25 | Part number: B2-007-10-F2
- Side Stand Washer | Part number: 41558-YQ5A-0000
- Side Stand | Part number: 41550-YQ5A-0000
- Side Stand Axle | Part number: 41559-YQ5A-0000
- Washer FB09002 d6d12 | Part number: FB09-002-06-16-02-F0
- Side Stand Switch | Part number: 23410-YQ5A-0000
- Washer FB09002 d6d15 | Part number: FB09-002-06-15-01-F2
- Screw B3002 M6*20 | Part number: B3-002-06-020-F0
